Showing the single result
Helmet graphic kit
From: €169,00 This product has multiple variants. The options may be chosen on the product pageGive your motorcycle helmet a unique look with a 100% custom helmet graphics kit, made in France. Whether you ride a full-face, motocross, modular, or jet helmet, each kit is precision-cut to your exact model, printed on premium cast vinyl, and delivered ready to install. Choose your design, approve your proof in 24 business hours, and receive your kit within days. Explore all our motorcycle graphics kits to match your helmet and bike in one cohesive livery.
A custom helmet graphics kit is a set of precision-cut vinyl decals that gives your motorcycle helmet a unique look without repainting. Each kit is shaped to the specific geometry of your helmet type, ensuring a smooth, gap-free fit across every curve and panel.
Full-face road helmets feature complex compound curves and wide surface areas across the shell, visor edge, and chin bar. The premium cast vinyl used in each kit is engineered to conform to these curved surfaces without lifting or bubbling over time. Find coordinated graphics kits for your sportbike or roadster to complete your track or road look.
Motocross helmets have an extended open chin bar and larger, relatively flat panel surfaces – making them the most popular helmet type for full graphics kit customization. The extended front surface delivers maximum visual impact. Complete your kit with a matching dirt bike graphics kit for your MX or trail bike.
Modular helmets feature a flip-front chin bar with a hinge mechanism. Each kit is precision-cut to clear the articulation point entirely – the hinge stays unobstructed and the helmet retains full modularity after the kit is applied.
Jet helmets offer a calotte-only profile with reduced surface area. The kit covers the upper shell and rear section, delivering a clean, precise look – whether you want a bold color statement or a refined minimalist finish.
A custom helmet graphics kit is only as good as the material behind it. Every kit is printed on premium cast vinyl, selected for its conformability on curved surfaces and its long-term outdoor durability.
Helmet graphics kits use cast vinyl, 75 to 100 microns thick. Cast vinyl is poured to its final thickness rather than stretched, which means it conforms precisely to curved surfaces and does not shrink or lift over time. Outdoor durability reaches 5 to 7 years with standard polymer cast vinyl, and up to 10 years with a UV-laminated premium finish. Available finishes: gloss, matte, chrome, holographic, and glitter. The matte finish in particular delivers a painted-helmet look without the weight or cost of a custom paint job.
Unlike a full automotive wrap that requires a heat gun to stretch and shape the film, helmet decal kits are applied entirely cold. Key steps: clean and degrease the helmet surface thoroughly, dry-fit each piece before committing, peel and apply progressively from the center outward, smooth edges firmly, and allow a 24-hour cure before the first wash. The adhesive on each piece is engineered to minimize bubbles during installation – no special tools needed.
Ordering your custom helmet decals takes three steps, from your design brief to delivery at your door.
Step 1 – Design brief. Select your helmet model, base color, and graphic elements: logo, number plate, text, color palette. Submit your brief directly through the product page or via the contact form.
Step 2 – Proof approval. Receive your digital proof within 24 business hours of ordering. Revisions are included at no extra cost until you fully approve the design. Once approved, production starts immediately.
Step 3 – Production and shipping. Production runs 48 to 72 business hours after proof approval. Worldwide shipping available.
Installing a helmet graphics kit is accessible to any rider – no professional tools required.
DIY install. Clean the helmet thoroughly – the surface must be clean, dry, and degreased. Dry-fit every piece before peeling. Apply progressively from the center outward, smooth edges with a soft squeegee, and allow 24 hours before the first wash. Full installation instructions are included with every kit. For individual custom sticker options, explore our motorcycle sticker collection.
Professional installation service. Prefer a factory-finish result with zero risk? Use our professional installation service. Send your helmet in, and get it back ready to ride.
Full-face, motocross/off-road, modular, and jet helmets are all compatible. Each kit is precision-cut to your exact helmet model. If your model is not listed in our catalog, contact us for a custom quote.
5 to 7 years in outdoor riding conditions with standard polymer cast vinyl. Up to 10 years with a UV-laminated premium finish.
No, provided the surface is properly prepared before application and the kit is removed correctly when the time comes. The adhesive is designed for clean removal. Satisfaction is guaranteed before printing – full refund if you cancel before approving your proof.
Yes. Applying decorative vinyl to your helmet does not affect its structural integrity or void ECE homologation, provided you do not cover any mandatory retroreflective elements. Check your local regulations for specific requirements – in France, four retroreflective devices must remain fully visible.
Yes. The kit ships with full installation instructions. No heat gun or professional tools are required. A professional installation service is also available if you prefer.
Proof within 24 business hours of ordering. Production in 48 to 72 business hours after proof approval. Delivery time depends on destination – worldwide shipping is available.
Yes. Warm the vinyl gently to soften the adhesive before peeling it away slowly. Any remaining adhesive residue can be removed with a standard surface prep cleaner. No damage to the helmet finish if removed correctly.
A graphics kit is a set of precision-cut vinyl decals applied cold to specific areas of your helmet – logos, panels, number plates, color sections. A full helmet wrap covers the entire helmet in a single sheet of vinyl, stretched using heat (requires professional equipment and skills). Graphics kits offer precise design customization; wraps deliver a solid color or simple all-over pattern.
