Stickers project is not directly affiliated with any trademark holder.
This category brings together graphics kits for Aprilia road sportbikes: the RS 660 (all model years since 2020) and the RSV4 (four generations from 2009 onwards). Each kit is made to order in France, in premium vinyl, fully customisable in colours, finishes and graphics, with a template cut to size for your exact model and year.
Browse the models below or navigate directly to your generation using the dedicated pages linked throughout this section.
This category covers the two flagship Aprilia road sportbikes: the RS 660, a mid-size parallel-twin built for road and track riding, and the RSV4, a V4 superbike with a full racing pedigree. Aprilia 50cc, Tuono and enduro models are not included in this selection.
Models available by series:
Each model has a dedicated category page listing kits by generation and year. Find your model via the links in the compatibility section below. For a full overview of sportbike and road bike options across all brands, the sportbike and road bike graphics kits category is your starting point.
Aprilia graphics templates are model year specific – each bodywork generation requires its own set of cuts. Ordering the wrong generation template results in misaligned panels and improper fitment. The information below helps you identify the correct generation before ordering.
The RS 660 was launched in 2020: a single fairing design covers model years 2020 to 2024, but the 2025 update introduced new aerodynamic winglets that may require a different template. If you own a 2025 RS 660 or RS 660 Factory, contact us before ordering to confirm template compatibility.
The RS 660 runs a 659cc parallel-twin engine with a 270-degree firing order, producing 100 hp in the 2024 model and 105 hp from the Euro 5+ compliant 2025 version. Bodywork across 2020-2024 is stable with no major panel redesign – one of the cleanest fairing lines in the mid-size sportbike segment. Browse available designs and colourways on the dedicated RS 660 2020-2024 graphics kit page.
The RSV4 has gone through four distinct bodywork generations since 2009, each with fairing shapes incompatible with the others: knowing your model year before ordering is essential.
Dedicated pages are available for the RSV4 2009-2014 graphics kit – first generation and the RSV4 2021 graphics kit – latest generation. Pages for the 2015-2018 and 2019-2020 generations are also available – use the subcategory navigation above to access them directly.
Every Aprilia graphics kit is made to order in France, in premium vinyl, from a template cut specifically for the exact model and generation – RS 660 2020-2024, RSV4 Gen 1, Gen 2, Gen 3 or Gen 4. This is not an off-the-shelf printed kit; each order begins with a design mockup sent for your approval before production starts.
Customisation options include colours, finishes (gloss, matt, satin, chrome effects), logos and race graphics. You can replicate an Aprilia factory-inspired tri-colour on your 2022 RS 660, or build a fully original livery for a 2021 RSV4 in matt black with red racing lines – the choice is entirely yours. Custom race numbers are also available as part of any kit. Delivery follows within a few days of proof approval. A professional fitting service is also available for riders who prefer a workshop installation.
Many Aprilia riders coordinate their bike and helmet graphics for a consistent look on track days. Our motorcycle helmet graphics kit range complements any Aprilia kit with matched colours and finishes.
Aprilia graphics kits are made from automotive-grade premium vinyl – brands including 3M, Hexis, Oracal and Avery Dennison – 200 to 300 microns thick depending on the application, with UV-resistant lamination to protect colour vibrancy on a sportbike fairing.
The UV laminate layer is the primary barrier against sun exposure, which is the main cause of colour fade on graphics kits in regular outdoor use. The material resists road spray, stone chips and wash cycles. Kits are removable without residue on a clean fairing, making them a reversible customisation option – useful if you plan to change design between seasons or before a resale.
Application is bubble-free at room temperature with a squeegee. For fairing sections with tight compound curves, a careful low-speed application or professional fitting avoids alignment issues.
This category covers the RS 660 (all years from 2020 onwards) and the RSV4 (four generations from 2009 to present). Aprilia RS4 50/125, Tuono 660, RX/SX 50/125 and enduro models are not part of the Stickers Project catalogue.
Yes, and it is significant. The RSV4 2015 belongs to Gen 2 (2015-2018) with a fairing shape that is incompatible with the Gen 4 (2021 onwards) design. The two generations share no common panel geometry. Always confirm your model year before ordering.
Partially. The RS 660 2020-2024 uses a stable fairing design with no major panel changes across those years. The 2025 model introduced new aerodynamic winglets that may affect template fit. If you have a 2025 RS 660 or RS 660 Factory, contact us before ordering to confirm compatibility.
Yes. Factory-inspired colourways – including the classic red-black Aprilia racing livery or the white-red RS 660 palette – are available as a starting point. Colours, finishes and graphic placements can all be adjusted at the mockup stage. The final kit is always validated by you before production begins.
A semi-custom kit uses an existing design template with colour changes only. A fully bespoke kit is built from scratch: colours, graphics, logos and layout are all defined by you. Both options include a mockup approval step before any vinyl is cut.
Premium automotive vinyl from brands such as 3M, Hexis and Oracal maintains its colour and texture without fading or cracking over several years of outdoor use, provided the kit is cared for correctly – no high-pressure direct washing, no abrasive cleaning products. Longevity depends on riding conditions and maintenance habits.
Yes. Self-installation is accessible with the right tools: a squeegee, a gentle cleaning spray and a heat source such as a hair dryer. Fitting instructions are provided with every kit. For fairing sections with tight compound curves – particularly on the RSV4 – a professional installation avoids misalignment and trapped air bubbles.
Kits are produced in premium automotive vinyl from brands including 3M, Hexis, Oracal and Avery Dennison. Thickness is 200 to 300 microns for road use, which offers a balance between scratch protection and ease of application. A UV-resistant laminate is applied over the printed layer to protect against sun exposure and colour fade.
No. The current Stickers Project catalogue for Aprilia covers the RS 660 and the RSV4 only. The Tuono 660, RS4 50/125, RX/SX 50/125 and other Aprilia models are not currently included. Contact us if you are looking for a model not listed.
Yes. Race-inspired liveries – including WorldSBK-style graphics or MotoGP colour references – can be built as a fully bespoke kit. Custom race number plates for the RS 660 or RSV4 are available as a standalone option or as part of a complete graphics kit. Provide your reference at the mockup stage.
