MORINI GRAPHICS KITS

Moto Morini graphic kits are produced to order in France in premium vinyl (200 to 300 microns), fully customisable in colours, finishes and logos, with a design proof sent for approval before production begins. The range covers the flagship X-Cape 650 (from 2021), the new X-Cape 700 (2025) and legacy Sport models on request.

A graphic kit is precision-cut for the exact fairing of your model. The X-Cape 650 and X-Cape 700 do not necessarily share the same template – the 2025 fairing was redesigned. Select your model below to access compatible kits.

Which Morini Model for Your Graphic Kit?

Each model in the Moto Morini range has a distinct fairing profile. A graphic kit built for one model does not fit another without prior template verification. Identify your model and model year before ordering.

X-Cape 650 – the flagship mid-size trail since 2021

The Moto Morini X-Cape 650 is powered by a 649cc parallel twin (DOHC 8 valves) producing 60hp (44kW) at 8,250rpm. An A2 version is available at 47.5hp (34.9kW) with an identical fairing – the graphic kit template is therefore the same regardless of the power derivation. The bike weighs approximately 213kg and has been in production since 2021. The 2021 to 2025 model years share the same fairing, which simplifies kit compatibility across the full production run.

Browse the available kits for this model in the dirt bike graphics hub, the main landing page for the adventure and trail range.

X-Cape 700 – the 2025 update

The Moto Morini X-Cape 700 introduced in 2025 grows to 693cc (4mm longer stroke), with power raised to 71hp at 8,500rpm and torque of 68Nm at 6,500rpm, to Euro5+ standard. Its fairing was fully restyled for this model year, meaning the template may differ from the X-Cape 650. If you own an X-Cape 700, please contact us to confirm template compatibility before ordering.

Other Moto Morini models – Sport and legacy range

The Morini Sport and 1200 models (1,187cc twin lineage) are older references with specific fairing profiles. For these models, contact us directly to check template availability and launch a bespoke production run.

Fully Custom, Made in France

Every Moto Morini graphic kit is produced to order in France, using a template precision-cut for your exact model and model year. Two levels of personalisation are available.

Standard kits offer predefined two-tone designs with a choice of colours and finishes from the available range. Fully custom kits open up free colour choice, logos, race numbers and special finishes – satin, pearl, chrome or flake. A digital design proof is sent for approval before any production begins. No kit enters the workshop without your sign-off.

For a coordinated look, explore the motorcycle helmet graphics range, or let us handle the fitting with the professional application service.

Premium Vinyl Materials and Longevity

Moto Morini graphic kits are produced in automotive-grade premium vinyl (3M, Hexis, Oracal, Avery Dennison), 200 to 300 microns thick, with UV-resistant lamination. This specification is the same used in professional motorsport and automotive wrapping – not standard printed film.

The UV laminate layer is the primary defence against colour fade in outdoor use. The vinyl withstands regular washing, road debris and weather exposure, maintaining colour consistency over several years of riding. Application is straightforward at room temperature with a squeegee – the vinyl is repositionable during fitting, which limits errors on complex fairing curves. Kits are removable without residue on clean, sound bodywork.

For other trail and adventure brands, explore the Honda dirt bike graphics, Yamaha dirt bike graphics and KTM dirt bike graphics categories. For a comparable mid-size trail model, see the Yamaha Ténéré 700 graphic kit. The full street and track range is available via the street and track bike graphics hub.

FAQ – Morini Graphic Kit

Which Moto Morini models are covered by these graphic kits?

Graphic kits cover the X-Cape 650 (2021 to 2025 model years), the X-Cape 700 (2025, subject to template compatibility verification) and legacy Sport and 1200 models on request. For any model outside the current catalogue, contact us with the exact model reference and year.

Do the X-Cape 650 and X-Cape 700 share the same graphic kit template?

Not necessarily. The X-Cape 700 launched in 2025 features a restyled fairing compared to the X-Cape 650, meaning the templates may differ. Before ordering a graphic kit for an X-Cape 700, please contact us to confirm compatibility.

Can I order a fully custom design for my Morini?

Yes. A fully custom kit allows you to choose colours freely, finishes (matt, satin, pearl, chrome, flake), logos and race numbers. A digital design proof is prepared and sent for your approval before production begins – no kit enters manufacture without your confirmation.

Does the graphic kit fit the X-Cape 650 A2 version?

Yes. The A2 version of the X-Cape 650 (47.5hp / 34.9kW) retains the same fairing as the standard version (60hp). The graphic kit template is identical regardless of the power derivation. Simply indicate your model year when ordering.

What vinyl is used and how long does it last?

Premium vinyl from 3M, Hexis, Oracal or Avery Dennison, 200 to 300 microns thick, with UV-resistant lamination. This material specification provides colour durability over several years of standard road use with normal maintenance.

Can I fit the graphic kit myself?

Yes. Fitting is done at room temperature with a squeegee, with no specialist tools required. The vinyl is repositionable during application, which limits errors on curved surfaces. A professional fitting service is also available for riders who prefer it.