YZF 450 GRAPHIC KIT

Your YZF 450 graphic kit is cut to the exact fairing profile of your generation – from the 2003 original through to the fully revised 2023+ YZ450F. Every kit is made to order in France using premium 200 to 300 micron vinyl, fully customisable in colours, logos and race numbers, with a digital proof approved before production begins.

4 catalogue designs are available. Select your year below to find the graphics compatible with your bike.

The YZF 450 Template: Built for Pure Competition

What Sets the YZF 450 Apart

The Yamaha YZF 450 is a pure motocross competition machine – not road-registered, not street-legal, and intended exclusively for circuit and off-road use. It is the only bike in its class to retain a reversed cylinder head, with the intake positioned at the front and the exhaust at the rear, lowering the centre of gravity for optimised handling on the track.

The engine is a liquid-cooled single-cylinder DOHC 4-stroke with 4 titanium valves. Power output reaches approximately 58 to 59 bhp on the 2023 and later generations (dyno figures), compared to around 52 bhp on the early 2003-2005 models. The 2023 redesign brought a new engine, an all-new frame, and a weight reduction of approximately 2.3 kg. The displacement was set at 449 cc from 2003 to comply with AMA Motocross regulations, with electronic fuel injection introduced across the range from 2010.

Year Compatibility

YZF 450 fairings vary across four main generation blocks: 2010-2013, 2014-2017, 2018-2022, and 2023 to present. Each block requires a specific graphic cut. The 50th Anniversary special edition (white and purple livery inspired by 1990s Yamaha YZ heritage) covers the 2024 model year. The exact cut should be confirmed by year before ordering.

Which Generation Is Your Bike?

If you are unsure of your generation block, compare your side panel and tank shroud profile against the images in each year listing. For other Yamaha motocross models, visit the Yamaha brand hub or browse the full dirt bike graphics category. You can also explore the YZ 125 & 250 graphic kit and the YZF 250 graphic kit if you ride another model in the Yamaha range.

Custom Made in France

Standard or Fully Personalised

Every YZF 450 graphic kit can be ordered as a standard design or fully personalised: choose your colours, add logos, race numbers, and select a matt or gloss finish. A fitting service is available if you want us to handle the installation. A digital proof is sent to you for approval before production – you see exactly what your kit will look like before it ships.

4 Designs Available

The catalogue offers 4 designs for the YZF 450, covering different personalisation configurations. If you want to complete your bike’s look, our helmet graphic kits let you coordinate your helmet with your bike. Riders who also run a trail bike can find the TENERE 700 WORLD RAID GRAPHIC KIT 2022 in the same Yamaha range.

Materials and Premium Vinyl

All stickersproject graphic kits are produced in 200 to 300 micron vinyl with UV-resistant lamination, built to withstand the demands of motocross competition. Materials are sourced from professional-grade references: 3M, Hexis, Oracal, and Avery. Application is done with a squeegee on clean, dry fairings – the graphics are repositionable during fitting and removable without residue on panels in good condition.

FAQ – YZF 450

Will the graphic kit fit my exact model year?

Kits are cut by generation block: 2010-2013, 2014-2017, 2018-2022, and 2023 to present. Specify your year when ordering – our team confirms compatibility before production.

What is the difference between the YZF 450 and YZF 250 graphic kits?

The YZF 450 and YZF 250 share a similar architecture but differ in fairing dimensions and geometry. The two templates are not interchangeable.

Does the YZF 450 fall under A2 licence restrictions?

No. The YZF 450 is a competition-only machine that is not road-registered and not street-legal. A2 licence power restrictions do not apply to this bike.

How many designs are available for the YZF 450?

4 catalogue designs are available for this model, covering a range of personalisation options and colour combinations.

Can I choose custom colours, or do I have to use factory colours?

Kits are fully customisable – you choose the colours, logos, numbers and finish. There is no requirement to replicate any factory livery.

What vinyl is used to make the kits?

Kits are produced in premium 200 to 300 micron vinyl with UV-resistant lamination, using professional-grade materials from 3M, Hexis, Oracal, or Avery depending on the configuration selected.