Showing all 3 resultsSorted by latest
Graphic kit 100% perso – cross
From: €349,00 This product has multiple variants. The options may be chosen on the product page
Graphic kit logo customization
€60,00
Graphic kit installation
From: €249,00 This product has multiple variants. The options may be chosen on the product pageEvery Husqvarna Norden 901 2022 graphic kit from Stickers Project is made to order in France, in premium vinyl from 200 to 300 microns thick, cut from a template shaped precisely for the tall adventure bodywork of the first-generation Norden – fuel tank, radiator scoops, high front mudguard and headlight nacelle. This adventure-tourer cutting layout is very different from a roadster or a motocross bike: it dictates every panel of the kit for a clean, accurate fit.
Customisation is 100% yours: colours, finishes, logos and race numbers to your specification. A digital mock-up is sent for your approval before production begins. 3 designs are available in the catalogue. Select your design below and configure your kit.
The Husqvarna Norden 901 2022 graphic kit is designed for the first generation of the Norden, launched at the end of 2021 and sold from 2022 onwards. Its tall adventure bodywork – with the characteristic Scandinavian styling, Husqvarna yellow and anthracite grey – is specific to this generation and requires a dedicated cutting template. If your bike was registered in 2022 or falls within the 2022-2025 generation with no major fairing update, this template is the correct one.
The Husqvarna Norden 901 2022 is powered by the parallel-twin LC8c engine of 889 cc (marketed as 901) producing 105 hp (77 kW) at 8,000 rpm and approximately 100 Nm at 6,500 rpm. The engine is a 4-stroke, DOHC 8-valve, liquid-cooled, fuel-injected unit shared with the KTM 890 Duke and KTM 890 Adventure. The Norden stands apart through its adventure-specific bodywork: prominent fuel tank, wide radiator scoops, high front mudguard and upright headlight nacelle. These flat and generous surfaces are ideal for a fully custom graphic kit. The full-power 77 kW version does not qualify for an A2 licence; the bike can however be restricted to 35 kW to comply with A2 requirements, subject to the options available through the Husqvarna dealer network.
The first-generation Norden 901 bodywork is identical across the 2022 to 2025 model years – no significant engine updates or plastic changes occurred during this period. A single template covers the entire generation. If your bike carries a model year from 2022 to 2025 with this original bodywork, the graphic kit on this page fits it correctly.
For graphic kits covering other models in the Husqvarna range, see the HUSQVARNA 250 TC FC FS GRAPHIC KIT or the HUSQVARNA 350 TC FC FS GRAPHIC KIT. Our full Husqvarna range is available from the Husqvarna brand hub, and all trail and dirt bike graphic kits are listed in the dirt bike graphics category.
Every Norden 901 2022 graphic kit is produced in France on demand. Nothing is pre-printed or held in stock: the template is cut to order using the exact dimensions of the first-generation bodywork and the customisation choices you provide at the time of order.
The standard kit uses an existing catalogue design in your chosen colours, including Husqvarna factory yellow and anthracite grey. The 100% custom kit is designed by our team from your brief: any colours, logos, race number, and finishes in matt, gloss, satin or carbon effect. In both cases, a digital mock-up is sent before production for your approval and any adjustments. A professional fitting service is also available for the large plastic surfaces of the Norden 901.
3 designs are listed for the Husqvarna Norden 901 2022. Each can be personalised in colours and finishes. Browse the options below and select the one that matches your project.
Husqvarna Norden 901 2022 graphic kits are produced in automotive-grade vinyl from 3M, Hexis, Oracal or Avery, 200 to 300 microns thick. A UV-resistant laminate protects colours against fading from sun exposure, mud splashes and the weather encountered on adventure touring rides and mixed-terrain trails.
Application is done with a squeegee at room temperature. The vinyl is repositionable during fitting, allowing precise alignment on the Norden’s curved panels before final adhesion. Kits are removable without residue on clean plastic. To complete your look with a coordinated helmet design, see our helmet graphics kit range.
Yes. The template on this page is designed specifically for the first generation of the Norden 901, sold from 2022 onwards. If your bike carries a model year from 2022 to 2025 with the original first-generation bodywork, this graphic kit fits it correctly.
The Norden 901 is a road-going adventure tourer with tall, specific bodywork – prominent fuel tank, wide radiator scoops, high front mudguard and upright headlight nacelle – which is very different from a motocross bike or a pure trail model such as the 250 or 350 TC/FC/FS. Cutting templates are unique to each bodywork family and are not interchangeable.
The full-power version produces 105 hp (77 kW), which exceeds the A2 threshold of 35 kW. The bike can however be restricted to 35 kW to comply with A2 requirements. If your bike has been restricted to A2, the graphic kit is identical – the bodywork template does not change between power versions.
3 designs are available in the catalogue for the Husqvarna Norden 901 2022. Each design is customisable in colours, finishes and graphic additions to match your preferences.
Both options are available. The standard kit includes colourways close to factory Husqvarna finishes, including the signature yellow and anthracite grey. The 100% custom kit lets you define every colour freely, with a mock-up sent for approval before production begins.
Kits are produced in automotive-grade vinyl from 3M, Hexis, Oracal or Avery, 200 to 300 microns thick, with a UV-resistant laminate. This thickness is suited to adventure conditions – stone impacts and mud splashes, engine heat on panels near the LC8c twin-cylinder block, and extended outdoor exposure.
