CBR 600 RR 2013 GRAPHICS KITS

Graphic kits for the Honda CBR 600 RR 2013-2019 are precision-cut to the exact fairing template of the fourth generation – the generation introduced by the 2013 restyle and carried through to the model’s European market exit in 2017, with continued production for other markets to 2019. Whether your bike is a 2013, a 2015 or a 2017, one template covers them all: the fairing was never redesigned across this generation.

Every kit is produced to order in France in premium vinyl (3M, Hexis, Oracal, Avery Dennison), fully customisable in colours, logos and finishes, with a design proof sent for approval before production begins. This is not a stock kit from a warehouse – it is a bespoke CBR 600 RR stickers set built for your specific bike.

The CBR 600 RR 2013-2019 – One Fairing Generation

The Honda CBR 600 RR (2013-2019 generation) is the most widely found generation of this supersport on the second-hand market across Europe. Its 599cc inline four-cylinder engine produces approximately 118hp depending on the market and model year. The 2013 restyle introduced a revised fairing profile and updated electronics, marking a clear break from the previous generation. Honda withdrew the CBR 600 RR from the European market in 2017 due to emissions regulations; it continued in production for other markets into 2019-2020.

Single fairing template across all 2013-2019 model years

The CBR 600 RR fairing remained unchanged from 2013 to 2019. A kit ordered for a 2013 model fits every year through to 2019 without modification – same template, same cut, same fit. Parts covered by a CBR 600 RR 2013-2019 graphic kit include: side panels, front mudguard, tank sides and tank top, rear unit sides, front fairing sections and lower fairings.

This single-generation consistency removes guesswork from ordering. Check that your model year falls between 2013 and 2019 before selecting a kit from this category.

Why the 2013-2019 kit does not fit 2007-2012 or 2024 models

The 2013-2019 template is not interchangeable with earlier or later generations. The 2007-2012 generation (third generation CBR 600 RR) has a distinct fairing with a prominent central air intake and a different side profile. The 2024 model, relaunched in Europe, uses the 2021-generation bodywork featuring aerodynamic winglets not present on the 2013-2019 design. These are different templates – ordering the wrong one results in panels that do not fit.

For model years outside this range, the Honda graphics kits hub covers all available generations.

Custom-Made in France – Bespoke Vinyl Built for Your CBR 600 RR

Every CBR 600 RR 2013-2019 graphic kit is produced to order in France using a template precision-cut for this fairing generation. No two kits leave the workshop identical unless ordered that way. Colours, logos, race numbers and finishes are all adjustable before the design proof is finalised – nothing enters production without sign-off from the customer.

Standard kit or 100% custom kit

The standard kit offers predefined two-tone colour combinations with a choice of finishes from the available range. The fully custom option opens up free colour selection, logo placement, race number integration, and special finishes including satin, pearl and chrome. You can replicate a factory Honda colour scheme – Repsol-style red, classic black, or the white-and-red race livery – or design something entirely original.

The design proof process means you see the final result on your CBR 600 RR before any material is cut. A professional fitting service is also available for riders who prefer to delegate installation on complex fairing curves.

For a coordinated look, explore our motorcycle helmet graphics kit range. Riders with a larger Honda supersport will find the CBR 1000 RR 2017 graphics kit in the Honda range. The full Honda graphics kits hub covers every model available.

Premium Vinyl Materials and Longevity

CBR 600 RR 2013-2019 graphic kits are produced in automotive-grade premium vinyl (3M, Hexis, Oracal, Avery Dennison), 200 to 300 microns thick, with UV-resistant lamination. This material specification matches professional motorsport and automotive wrapping standards – not standard printed film.

The UV laminate layer is the primary protection against colour fade from sunlight exposure, which is the main cause of graphic degradation on road-used bikes. The vinyl is weather-resistant, handles regular washing and road debris without delaminating, and maintains colour consistency over several years of riding. Application is bubble-free when performed at room temperature using a squeegee; the vinyl remains repositionable before final bonding, which reduces fitting errors on the CBR’s curved fairing surfaces. Kits are removable without residue on clean, undamaged paintwork.

Browse the full sports and street bike graphics catalogue to find kits for other models, or discover the Honda Hornet 2023 graphics kit if you ride a naked Honda alongside your CBR.

FAQ – CBR 600 RR 2013-2019 Graphic Kit

Which CBR 600 RR model years are compatible with this 2013-2019 graphic kit?

All model years from 2013 to 2019 are compatible: 2013, 2014, 2015, 2016, 2017 and in some cases 2019-2020 for markets outside the EU. The CBR 600 RR fairing was not redesigned during this period. A kit ordered for a 2013 model fits every year of this generation without modification.

Does the 2013-2019 graphic kit fit a CBR 600 RR 2007-2012?

No. The 2007-2012 and 2013-2019 generations have distinct fairings with non-interchangeable templates. The 2013 restyle changed the fairing profile, side lines and front structure. Always verify your registration year before ordering to ensure you select the correct generation.

Does the 2013-2019 kit fit a 2024 CBR 600 RR?

No. The CBR 600 RR 2024, relaunched in Europe, uses the 2021-generation bodywork featuring aerodynamic appendages that alter the fairing template. This is not compatible with the 2013-2019 template. If you have a 2024 model, contact us before ordering to confirm compatibility.

Can I replicate the original Honda colour scheme (Repsol, black, white-and-red)?

Yes, on a fully custom kit by specifying your chosen colours at the time of order. A design proof is prepared and sent for approval before any production begins. The standard kit offers predefined two-tone combinations with a choice of finishes from the available range.

What vinyl material and thickness are used for these kits?

Premium vinyl from 3M, Hexis, Oracal or Avery Dennison, 200 to 300 microns thick, with UV-resistant lamination. This specification is the same used in professional motorsport preparation. The kits are removable without residue on a clean, sound fairing surface.

Can I fit the CBR 600 RR graphic kit myself?

Yes. The kit is pre-cut and designed for bubble-free application at room temperature using a squeegee. The vinyl remains repositionable before final bonding, which reduces the risk of errors on the CBR’s curved panels. A professional fitting service is available for riders who prefer to delegate, particularly on the more complex lower fairing sections.

How long does the order process take – design proof, production and delivery?

The design proof is prepared within a few working days depending on the level of customisation requested. Production begins after the proof is approved, followed by despatch. For an accurate lead time specific to your order, contact the team directly before placing your order.