RSV4 2021 GRAPHIC KITS

Graphic kits for the Aprilia RSV4 2021 are precision-built for the restyled generation introduced that year: a completely redesigned fairing with integrated aerodynamic winglets, defining a new template that is incompatible with earlier RSV4 generations. Every kit is produced to order in France in premium vinyl (3M, Hexis, Oracal, Avery Dennison), fully customisable in colours, logos and finishes, with a design proof sent for approval before production begins.

This page covers graphic kits compatible with the RSV4 2021 generation. Select your model year below to browse available references.

Which RSV4 Generation for Your Graphic Kit?

The Aprilia RSV4 has gone through several distinct fairing generations since 2009, each requiring its own graphic kit template. A kit designed for one generation does not fit another – identifying your model year before ordering is essential to receive a kit cut precisely for your fairing.

RSV4 2021 and later – the restyled generation (this page)

The 2021 fairing revision introduced a completely new bodywork for the RSV4 1100, with integrated aerodynamic winglets built directly into the side panels and a revised front fairing profile. This 2021 template is unique: the lateral surfaces, nose cone and flanks were all redesigned compared to the 2019-2020 model. Graphic kits in this category cover model years 2021 to 2023-2024, depending on the exact fairing configuration – compatibility can be confirmed at point of order.

The RSV4 1100 (and RSV4 1100 Factory) produces approximately 217hp (around 160kW) from a 1099cc V4 engine set at 65 degrees. It is a track-focused sports bike that falls well above the 35kW A2 licence threshold and cannot be restricted. The 2021 model year carries Euro 5 homologation.

RSV4 2019-2020 – the pre-restyling 1100

The 2019-2020 generation uses the same V4 65-degree engine architecture but with a different displacement (1078cc) and a fairing with no integrated winglets. Its template is not interchangeable with the 2021 revision. If your RSV4 is a 2019 or 2020 model, graphic kits designed for that generation are available on the RSV4 2019-2020 graphic kits page.

RSV4 2015-2018 and RSV4 2009-2014 – earlier generations

The 2015-2018 generation (1000cc) and the original 2009-2014 generation (1000cc) each carry a distinct fairing that is not compatible with post-2018 models. Dedicated graphic kits for these generations are available on the RSV4 2015-2018 graphic kits and RSV4 2009-2014 graphic kits pages.

Full Customisation – Made in France

Every Aprilia RSV4 2021 graphic kit is produced to order in France, using a template precision-cut for the 2021 fairing generation. This is not a generic stock kit: every order starts with a digital design proof sent for your approval before a single piece of vinyl is cut.

Standard kit or fully bespoke

The standard kit offers predefined two-tone designs with a choice of colours and finishes from the available range. The fully bespoke option opens up unlimited colour choices, logo placement, race number integration, sponsor graphics, and special finishes including satin, pearl and chrome. You can replicate an original Aprilia colourway (matt black, Factory white, GP replica) or build a design with no precedent. A professional fitting service is available for riders who prefer not to apply the kit themselves.

To explore the full Aprilia range, the Aprilia graphic kits hub covers all available models. If you ride the accessible twin-cylinder Aprilia, the RS 660 2020 graphic kit page has dedicated references. For the full street and track bike catalogue across all brands, browse street and track bike graphics.

Premium Vinyl Materials and Longevity

RSV4 2021 graphic kits are produced in automotive-grade premium vinyl (3M, Hexis, Oracal, Avery Dennison), 200 to 300 microns thick, with UV-resistant lamination. This is the same material specification used in professional motorsport and automotive wrapping – not standard printed film.

The UV laminate layer protects against colour fade in outdoor conditions: the primary cause of degradation on motorcycle graphics. The vinyl withstands regular washing, road debris contact and temperature variation while maintaining colour consistency across several years of riding. Application is bubble-free when carried out at room temperature with a squeegee – kits are removable without residue on clean, undamaged bodywork.

A professional fitting service is available for complex fairing curves via the graphics application service. For a coordinated look across the whole bike, our motorcycle helmet graphics range uses the same vinyl and colour palettes.

FAQ – RSV4 2021 Graphic Kit

Which RSV4 model years are compatible with graphic kits in this category?

This category covers the Aprilia RSV4 1100 from the 2021 restyled generation, including model years 2021 to 2023-2024 depending on the exact fairing configuration. Earlier generations (2019-2020, 2015-2018, 2009-2014) each require their own template and have dedicated pages on this site.

Is an RSV4 2021 graphic kit compatible with a 2019-2020 model?

No. The 2021 fairing revision introduced a completely new bodywork with integrated aerodynamic winglets and redesigned side panels. The 2021 template is not interchangeable with the pre-restyling 2019-2020 generation. Always confirm your exact model year before ordering to ensure a precise fit.

Can I replicate an original Aprilia colourway on an RSV4 2021 graphic kit?

Yes, on a fully bespoke kit by specifying the colours you want when ordering. The standard kit offers predefined two-tone designs with a choice of finishes. Regardless of the option chosen, a digital design proof is prepared and sent for approval before production starts – no kit is cut without your sign-off.

What vinyl is used – thickness and UV resistance?

Premium vinyl from 3M, Hexis, Oracal or Avery Dennison, 200 to 300 microns thick, with UV-resistant lamination. The laminate layer is the primary protection against colour fade from sun exposure. Kits are removable without residue on clean, sound bodywork.

Can I fit the RSV4 graphic kit myself?

Yes. The kit is pre-cut for the 2021 fairing and designed for bubble-free application at room temperature using a squeegee. The vinyl is repositionable during fitting, which reduces the risk of errors on the curved surfaces of a track fairing. A professional fitting service is also available for those who prefer to delegate.

What are the production and delivery lead times?

Production begins only after the design proof has been approved by the customer. Lead times vary depending on the level of customisation chosen. Current lead times are shown on the product page at time of order. For a precise estimate on your specific build, contact the team directly.

Is the RSV4 2021 a full-licence bike – can it be ridden on an A2 licence?

No. The Aprilia RSV4 1100 develops approximately 217hp (around 160kW), which places it well above the 35kW A2 ceiling. It cannot be restricted to A2-compliant output. A full Category A licence is required to ride the RSV4 1100.