CBR 1000 RR 2017 GRAPHICS KITS

Graphic kits for the Honda CBR 1000 RR Fireblade 2017-2019 are precision-cut for the SC77 generation fairing – one template covering all three model years: 2017, 2018 and 2019. The SC77 fairing is not interchangeable with the 2012-2016 generation or the CBR 1000 RR-R SC82 (2020 onwards). Every kit is produced to order in France in premium vinyl (3M, Hexis, Oracal, Avery Dennison), fully customisable in colours and finishes, with a design proof sent for approval before production begins.

16 catalogue variants are available for the SC77 generation – black and white two-tone bases, USA colourway and solid red – all available as standard kits or fully bespoke builds. Select your variant below for a kit tailored precisely to your Fireblade SC77 fairing.

The CBR 1000 RR 2017-2019 – One Fairing, One Template

The Honda CBR 1000 RR Fireblade has gone through several distinct fairing generations. The SC77, introduced in 2017, represents a significant departure from the SC59 (2012-2016): the bodywork panels share no geometry with the earlier generation, and a kit designed for one will not fit the other. Confirming your generation before ordering is essential to receive a kit that fits correctly.

The 2017 restyle (SC77) – what changed from the previous generation

The SC77 CBR 1000 RR launched in 2017 brought substantial changes over the SC59 (2012-2016): significant weight reduction, and a full suite of on-board electronics including an Inertial Measurement Unit (IMU), traction control, riding modes, anti-wheelie and a TFT display. The 999cc inline four-cylinder engine produces approximately 189hp (141kW) at 13,000rpm, with around 114Nm of torque. These changes resulted in a sharper, more aerodynamic fairing profile – visually and dimensionally distinct from the SC59. The two generations are not interchangeable.

The CBR 1000 RR SC77 is not eligible for an A2 licence. At approximately 189hp (141kW), it far exceeds the EU A2 threshold of 35kW and cannot be restricted to comply with A2 requirements.

2017, 2018 and 2019 model-year compatibility

The SC77 fairing remained unchanged across the full 2017-2019 production run. A graphic kit ordered for a 2017 model fits the 2018 and 2019 models without modification. One template covers all three years.

Which CBR 1000 RR generation do you have?

The CBR 1000 RR range spans several distinct generations, each with its own fairing and dedicated graphic kit. The SC77 (2017-2019, this page) is separate from the 2012-2016 generation and from the CBR 1000 RR-R SC82 (2020 onwards), which features an entirely redesigned fairing. For other generations, see the CBR 1000 RR 2012 graphics kit, the CBR 1000 RR 2008 graphics kit, or the CBR 1000 RR-R 2020 graphics kit. The full Honda range is listed on the Honda graphics kits hub.

Fully Custom, Made in France

Every CBR 1000 RR 2017-2019 graphic kit is produced to order in France, from a template precision-cut for the SC77 fairing. This is not a generic sticker set printed in bulk and shipped from stock – each order begins with a digital design proof sent for client approval before production starts.

Standard kit or 100% custom kit

The standard kit offers predefined two-tone designs with a choice of colour combinations and finishes from the available range. The fully custom kit allows free colour selection, logo integration, race number placement and special finishes such as satin, pearlescent or chrome. You can replicate the original Honda Fireblade livery (red and white, black and red), build a MotoGP-inspired track design, or create something entirely original. A professional fitting service is available for riders who prefer to have the kit applied by a specialist.

For other Honda displacements, browse the CBR 600 RR 2013 graphics kit or the Hornet 2023 graphics kit for the naked range.

Colour options (16 catalogue variants)

16 variants are available for the CBR 1000 RR SC77: black and white two-tone bases available in red, green, pink, blue, grey and yellow combinations, a USA colourway and solid red. All colours are adjustable before the design proof is finalised.

Premium Vinyl Materials and Longevity

CBR 1000 RR 2017-2019 graphic kits are produced in automotive-grade premium vinyl (3M, Hexis, Oracal, Avery Dennison), 200 to 300 microns thick, with UV-resistant lamination. This specification matches professional motorsport and automotive wrapping standards – not standard printed film.

The UV laminate is the primary protection against colour fade under outdoor conditions. The vinyl withstands regular washing, road debris and varied weather over several years of riding without cracking or delaminating. Application is straightforward at room temperature with a squeegee, which allows repositioning before final bonding – critical on the curved panels of the Fireblade fairing. Kits are removable without residue on clean, undamaged bodywork.

For a coordinated look, our motorcycle helmet graphics kit range uses the same colour palettes, and the full sports and street bike graphics catalogue covers all other models.

FAQ – CBR 1000 RR 2017-2019 Graphic Kit

Are the 2017, 2018 and 2019 CBR 1000 RR model years all compatible with the same graphic kit?

Yes. The SC77 fairing is identical across all three model years. A kit ordered for a 2017 model fits the 2018 and 2019 models without modification. One template, one precision cut, all years covered.

What is the difference between the SC77 (2017-2019) and the SC82 RR-R (2020 onwards)?

The CBR 1000 RR-R SC82, launched in 2020, features an entirely new fairing – wider, more angular, inspired by the RC213V-S race bike. The SC77 (2017-2019) and SC82 (2020+) templates are not interchangeable. If your bike is a 2020 or later, see the CBR 1000 RR-R 2020 graphics kit page.

Is the Honda CBR 1000 RR Fireblade 2017-2019 eligible for an A2 licence?

No. The CBR 1000 RR SC77 produces approximately 189hp (141kW), far above the EU A2 limit of 35kW. It cannot be restricted to comply with A2 requirements. A full Category A licence is required.

How many colour variants are available for the CBR 1000 RR 2017-2019?

16 catalogue variants are available: black and white two-tone bases in multiple colour combinations (red, green, pink, blue, grey, yellow), a USA colourway and solid red. All colours are adjustable before the design proof is sent.

Can I replicate the original Honda Fireblade livery (red and white, black and red)?

Yes, on either a standard kit or a fully custom kit by specifying the colours at order stage. A digital design proof is prepared and sent for approval before production begins. Special finishes including satin, pearlescent and chrome are available on the custom kit.

What vinyl specification is used for the CBR 1000 RR kits?

Premium vinyl from 3M, Hexis, Oracal or Avery Dennison, 200 to 300 microns thick, with UV-resistant lamination. Kits are removable without residue on clean, undamaged bodywork. Application is by squeegee at room temperature, with no specialist tools required.

Can I add my own logos or race numbers to the graphic kit?

Yes. The fully custom kit includes logo integration, race number placement and sponsor graphics as options. All elements are incorporated into the digital design proof, which is validated before production starts – no kit enters production without your approval.