R1 2009-2014 GRAPHIC KIT

This range covers graphic kits for the Yamaha YZF-R1 2009-2014 (crossplane generation, 998cc, code RN22), with two distinct fairing sub-generations: 2009-2011 and 2012-2014 (MotoGP-inspired restyled nose). Every kit is made in France on order, in premium vinyl, template-cut by exact model year.

Browse the collection below or navigate directly to your year using the dedicated sections on this page.

Which R1 generation does this cover? The 2009-2014 crossplane years

This category covers the Yamaha YZF-R1 crossplane generation (code RN22), produced from 2009 to 2014 and powered by a 998cc inline-four with a crossplane crankshaft – a technology transferred directly from Yamaha’s M1 MotoGP programme. It marked a turning point in superbike engineering, delivering power characteristics closer to a V4 than a conventional inline-four.

Two distinct fairing profiles fall within this generation, requiring separate graphic kit templates.

2009-2011 fairing – the original crossplane design

The 2009 model introduced repositioned ram-air intakes alongside projector headlamps, a more angular nose and a tighter overall silhouette. This bodywork design remained consistent through 2011. Graphic kit templates for this sub-generation are cut to these specific panel shapes. A 2009 R1 in race yellow with rider number, or a 2011 model in matte black with contrast side panels – both are achievable from the same 2009-2011 template family.

2012-2014 fairing – MotoGP-inspired restyling

For 2012, Yamaha restyled the R1 with a nose design directly referencing the M1 MotoGP racer, a slotted top yoke and revised rear suspension. Six-level traction control (TCS) was added as standard. The front fairing panels differ meaningfully from the 2009-2011 design, so graphic kit templates are not interchangeable between the two sub-generations. A buyer with a 2012 R1 always needs the 2012-2014 template. Always state your exact production year when ordering.

Custom graphic kits handmade in France for your R1

Every Yamaha R1 graphic kit in this range is made to order in France, cut from a template designed for your exact model year – 2009, 2010, 2011, 2012, 2013 or 2014. There are no generic, off-the-shelf kits in this catalogue.

Customisation options include base colour, finish type (matt, gloss, satin), rider numbers, logos and optional chrome or holographic base. A design proof is sent for your approval before any production begins – you request adjustments before anything is cut.

For other Yamaha sportsbike models, the full range is available on the Yamaha graphic kits for sports and road bikes hub page, which also links to the R6, MT09 and MT10 dedicated categories.

Materials and durability – what makes up your graphic kit

Graphic kits for the Yamaha R1 2009-2014 are produced in high-grade automotive vinyl (3M, Hexis, Oracal, Avery Dennison), at 200 to 300 microns thickness for road use, with integrated UV-protective lamination to maintain colour and finish over time. Premium-grade ranges extend up to 550 microns for intensive track-day use.

The UV laminate layer is the primary defence against colour fade under regular outdoor exposure. Kits are removable without leaving residue on a clean, undamaged fairing. Application with a squeegee at room temperature ensures a bubble-free finish and makes future removal straightforward.

How to order – choosing the right template for your R1

To order a graphic kit that fits your Yamaha R1 perfectly, simply specify your exact production year at checkout – the 2009-2011 and 2012-2014 generations have different fairing profiles requiring separate templates. The process runs in four steps: choose your design, specify your year, approve the proof, then production begins.

If your R1 was made in 2015 or later, see the R1 graphic kit 2015-2019 page. For a 2020 or later model, the R1 2020 graphic kit covers the current generation. If you also ride a Yamaha R6 from the same era, the R6 2008-2016 graphic kit is available with the same customisation options. To complete your look with a coordinated helmet, browse our matching helmet graphic kits.

FAQ – Yamaha R1 2009-2014 Graphic Kit

Do these graphic kits fit all Yamaha R1 models made between 2009 and 2014?

Yes, all production years from 2009 to 2014 are covered. Two fairing templates exist within this range: the 2009-2011 original design and the 2012-2014 revised version. Please specify your exact model year when ordering so the template is correctly matched.

What changed on the R1 fairing between 2009-2011 and 2012-2014?

In 2012, Yamaha restyled the R1’s front fairing with a nose design inspired by the M1 MotoGP racer and a slotted top yoke. The bodywork panels differ from the 2009-2011 generation, so graphic kit templates are not interchangeable between the two. Always state your precise year at order.

Is this the crossplane-engine generation of the R1?

Yes. The 2009-2014 R1 (generation code RN22) introduced the crossplane crankshaft to production motorcycle racing – a technology transferred directly from Yamaha’s M1 MotoGP programme. The 998cc inline-four delivers power characteristics closer to a V4 engine, making it a milestone in superbike engineering.

What materials are used in the graphic kits?

Kits are produced in high-grade automotive vinyl – brands including 3M, Hexis, Oracal and Avery Dennison – at 200 to 300 microns thickness for road riding. Higher-grade ranges extend up to 550 microns. All kits include integrated UV-protective lamination to maintain colour and finish.

Can I choose my own colours and finishes for my R1?

Yes. Every kit is fully customisable: base colour, finish type (matt, gloss, satin), rider number design, logos and optional chrome or holographic base. A design proof is sent for your approval before production begins – you request adjustments before anything is cut.

Will the vinyl come off cleanly without damaging the fairing?

Yes. The vinyl is designed to be removable without leaving residue on a clean, undamaged fairing. Application with a squeegee at room temperature is recommended to avoid air bubbles and make future removal straightforward.

Does this page cover the R1 2015 onwards or the 2020 model?

No. This category is dedicated to the 2009-2014 generation only. For a 2015-2019 R1, see the R1 2015-2019 graphic kit category. For a 2020 or later R1, see the R1 2020 graphic kit category.

How long will a graphic kit last on a road-ridden R1?

With premium vinyl and UV lamination properly applied, colours and finishes hold up well over several years of normal road use. Actual longevity depends on UV exposure, washing frequency and storage conditions. No specific year guarantee can be given without knowing individual riding and maintenance conditions.

Can I order a graphic kit for a track-day R1?

Yes. For intensive track use with repeated heat cycles, a higher-thickness vinyl (up to 550 microns) is advisable for better adhesion and thermal stability. Specify your intended use when ordering for a recommendation.

Where can I find graphic kits for other Yamaha models?

The full Yamaha sports and road range is available in the Yamaha graphic kits category, with dedicated pages for the R6, MT09, MT10 and other models. Matching helmet graphic kits are also available to complete your personalisation.