CBR 600 RR 2020 GRAPHICS KITS

Honda CBR 600 RR graphics kits in this category are designed for fairing generations from 2007 onwards: the 2007-2012 generation, the 2013-2020 generation, and earlier models. For the 2024 European relaunch (which uses the updated 2021 bodywork), contact us to confirm template compatibility before ordering. Each kit is made to order in France in premium vinyl (200 to 300 microns), fully customisable in colours and finishes, with a digital proof validated before production.

Browse the sections below to identify your generation, then navigate directly to the dedicated category page for your model year. You can also explore the full range of Honda sportive graphics kits or the broader sportbike and road graphics collection.

Which CBR 600 RR generation do your graphics fit?

The Honda CBR 600 RR has gone through five distinct fairing generations since 2003 – a graphics kit designed for one generation will not fit another, so identifying your model year before ordering is essential.

CBR 600 RR 2013-2020 – the most common generation

This is the fifth generation of the CBR 600 RR. Honda kept the fairing design unchanged from 2013 to 2020, with updates focused on the 12-spoke wheels and ECU mapping. The model was withdrawn from the European market in 2017 due to emissions regulations, then relaunched in April 2024 with Euro 5 compliance, a TFT display and 119 hp at 14,250 rpm from its 599cc engine.

Note on 2024 compatibility: the 2024 European model adopts the revised 2021 bodywork (including aerodynamic winglets), which differs from the 2013-2020 fairing shape. If you ride a 2024 CBR 600 RR, contact us to confirm which template applies before ordering. Browse the full range of CBR 600 RR 2013-2019 graphics kits for the 2013-2020 generation.

CBR 600 RR 2007-2012 – the iconic track generation

The third and fourth generation of the CBR 600 RR was introduced in 2007 with a major redesign: a 9 kg weight reduction, a central ram-air duct and sharper fairing lines that defined the look of the supersport class at the time. Optional ABS was added from 2009 onwards. This generation has a distinct fairing profile that is not interchangeable with the 2013+ shape. Kits for the 2007-2012 CBR 600 RR are available on request.

Custom graphics made in France

Every Honda CBR 600 RR graphics kit is produced on order in France, using premium vinyl from brands such as 3M, Hexis, Oracal, and Avery Dennison, with a template cut precisely for your fairing generation. This is not a generic pre-printed sheet – every order is built from your exact model year template.

Standard kit or fully customised kit

A standard kit gives you a set design with a choice of colours and finishes (gloss, satin, matte, pearl or chrome effects). A fully custom kit starts from a blank canvas: you choose colours freely, add personal logos, race numbers, or team graphics. For riders wanting a race replica look or a completely original livery, the custom route delivers exactly that.

A digital proof is prepared and sent for approval before any vinyl is cut. Nothing goes into production until you confirm the design. A professional fitting service is also available for riders who prefer a workshop install rather than a DIY application.

Pair your CBR 600 RR kit with a matching set from our helmet graphics kits range for a coordinated track-day or touring look. If you ride a larger Honda, the CBR 1000 RR-R 2020 graphics kit page covers the full litre-class range.

FAQ – CBR 600 RR Graphics Kits

Which Honda CBR 600 RR generations are covered by these graphics kits?

This page covers two main fairing generations: the 2007-2012 generation (third and fourth fairing design) and the 2013-2020 generation (fifth generation, fairing unchanged across all years). For the 2024 European relaunch, which uses the updated 2021 bodywork with aerodynamic winglets, contact us to confirm template compatibility. Earlier models are available on request.

Is a CBR 600 RR 2020 graphics kit compatible with the 2024 model?

Not directly. The 2024 European CBR 600 RR uses the revised 2021 bodywork (with aerodynamic winglets), which differs from the 2013-2020 fairing design. Contact us with your model year before ordering so we can confirm the correct template for your bike.

Can I get a custom colour scheme on my CBR 600 RR graphics kit?

Yes, on the fully custom option. You choose any colour, add personal logos, race numbers, or special finishes such as satin, pearl or chrome. A digital proof is sent for your approval before production begins – nothing is cut until you confirm.

What vinyl is used – thickness and UV resistance?

Kits are produced in premium vinyl, 200 to 300 microns thick for road use, with anti-UV lamination. Vinyl brands used include 3M, Hexis, Oracal and Avery Dennison. The material is removable without residue on a clean surface.

Can I fit the graphics kit myself?

Yes. Application requires a squeegee and a clean surface at room temperature – no specialist tools. For fairings with tight curves or compound shapes, a professional fitting service is available and removes the risk of misalignment.

Will a CBR 600 RR 2013 kit fit a 2019 model?

Yes. Honda kept the CBR 600 RR fairing unchanged from 2013 to 2020. Any kit designed for this generation is compatible with all model years in that range, including the 2014, 2015, 2016, 2017 and 2019 builds.

Is the CBR 600 RR still in production in 2026?

Honda relaunched the CBR 600 RR in Europe in April 2024 after a seven-year absence – the model was withdrawn in 2017 due to tightening emissions standards. The 2024 model is Euro 5 compliant and available in several European markets.

How long does production and delivery take?

A digital proof is prepared within a few working days of your order. Production begins after you approve the design, followed by fast dispatch. Contact the team directly for current production and delivery lead times.