GSX-R 1000 2009-2016 GRAPHIC KIT

Graphics kits for the Suzuki GSX-R 1000 in this category cover the 2009-2016 fairing generations: the K9-L1 generation (2009-2011) and the restyled L2-L6 generation (2012-2016). Every kit is produced to order in France in premium vinyl (200 to 300 microns), fully customisable in colours and finishes, with a design proof sent for approval before production begins.

Both generations share a 999cc four-cylinder inline architecture placed firmly in the supersport 1000cc segment – but their fairing profiles are distinct. Identifying your generation before ordering is essential to obtain a kit precision-cut for your exact bodywork. Browse the full Suzuki range on the Suzuki graphics kits hub.

Which GSX-R 1000 2009-2016 Generation for Your Graphics Kit?

The Suzuki GSX-R 1000 went through two distinct fairing revisions across 2009-2016: the K9-L1 generation and the L2-L6 generation. A graphics kit designed for one generation does not fit the other – the cut templates are different. Knowing your model year before ordering is the single most important step to ensure a correct fit across every fairing panel.

GSX-R 1000 K9-L1 (2009-2011)

The K9-L1 generation covers model years 2009 (K9), 2010 (L0) and 2011 (L1). The fairing on this generation is characterised by sharp, taut lines typical of the supersport category in that period, with a narrower nose section than the subsequent restyling. The 999cc four-cylinder engine in this configuration is one of the most widely found in the second-hand market. Graphics kit templates for the K9-L1 generation are compatible with all three model years without distinction.

Parts covered by a full graphics kit include: side panels, belly pan, front mudguard, tank sides, tank top, rear unit sides and rear unit top.

GSX-R 1000 L2-L6 (2012-2016)

The L2-L6 generation covers model years 2012 through 2016. The 2012 restyling introduced revised bodywork with updated fairing angles – side panels, belly pan and rear unit were all redesigned. This L2-L6 fairing profile is distinct from the K9-L1: a kit cut for the 2009-2011 generation does not fit a 2012-2016 model. Precision-cut templates specific to this generation ensure a proper fit across every panel.

The 2017 GSX-R 1000 (L7 generation) has a completely different fairing and is covered by a dedicated category. If you have a 2017 or later model, visit the GSX-R 1000 2017 graphics kit page for compatible kits.

Full Customisation – Made to Order in France

Every GSX-R 1000 2009-2016 graphics kit is produced to order in France, using a template precision-cut for your specific fairing generation and model year. This is not a generic stock kit applied in series – every order starts with a digital design proof sent for your approval before production begins. No kit enters production without your sign-off.

Standard kit or fully custom kit

The standard kit offers predefined two-tone designs with a choice of colour combinations and finishes from the available range. The fully custom kit opens access to free colour selection, logo placement, race number integration and special finishes including satin, pearl and chrome effects. You can replicate the original Suzuki colour schemes (GSX-R blue-white, black) or create an entirely original design. A professional fitting service is also available for riders who prefer to delegate installation.

For the wider Suzuki street range, explore the GSX-S 1000 2015-2020 graphics kit or the GSX-S 750 2017 graphics kit for the roadster side of the range. The full sports and street catalogue is available at sport and street bike graphics.

Premium Vinyl Materials and Longevity

GSX-R 1000 2009-2016 graphics kits are produced in automotive-grade premium vinyl (3M, Hexis, Oracal, Avery Dennison), 200 to 300 microns thick, with UV-resistant lamination. This specification is the same used in professional motorsport and automotive wrapping – not standard printed film.

The UV laminate layer is the primary protection against colour fade in outdoor use. The vinyl withstands regular washing, road debris contact and standard weather exposure, maintaining colour consistency over several years of riding. For specific configurations, a heavier variant up to 550 microns is available. Application is bubble-free when done at room temperature with a squeegee, allowing repositioning before final adhesion. Kits are removable without residue on clean, sound bodywork.

For a coordinated look, browse our motorcycle helmet graphics kit range alongside your GSX-R 1000 kit. All graphics kits and categories are accessible via the graphic kits hub.

FAQ – GSX-R 1000 2009-2016 Graphics Kit

Which generations are covered by this category?

This category covers the K9-L1 fairing generation (model years 2009, 2010, 2011) and the L2-L6 generation (model years 2012, 2013, 2014, 2015, 2016) of the Suzuki GSX-R 1000. Templates are distinct between the two sub-generations. The 2017 and later generation (L7) has a different fairing and is covered by a separate category.

Is a GSX-R 1000 2009-2016 graphics kit compatible with the 2017 model?

No. The GSX-R 1000 2017 (L7 generation) was completely redesigned with a new fairing. Cut templates are different from those of the 2009-2016 period. For a 2017 model, visit the GSX-R 1000 2017 graphics kit category.

Is a K9-L1 (2009-2011) kit compatible with an L2-L6 (2012-2016) model?

No. The 2012 restyling introduced new bodywork with different fairing profiles. K9-L1 and L2-L6 templates are distinct. If you are unsure of your generation, contact us with your exact model year for verification before ordering.

Can I replicate an original Suzuki colour scheme (GSX-R blue-white, black)?

Yes, on a fully custom kit by specifying the desired colours when ordering. The standard kit offers predefined two-tone colour combinations with a choice of finishes. A digital design proof is sent for your approval before any production begins.

What vinyl material is used – thickness and UV resistance?

Premium vinyl from 3M, Hexis, Oracal or Avery Dennison, 200 to 300 microns thick, with UV-resistant lamination. The laminate layer prevents colour fade from sun exposure, which is the primary cause of degradation on outdoor graphics.

Can I fit the graphics kit myself?

Yes. The kit is pre-cut and designed for bubble-free application at room temperature using a squeegee. The vinyl is repositionable during fitting, which reduces errors on curved fairing surfaces. A professional fitting service is available for riders who prefer to delegate, particularly useful on complex bodywork sections.

What are the production and delivery lead times?

Production begins after the design proof is approved. Lead times vary depending on the level of customisation chosen. Current lead times are displayed on the product page at the time of ordering.