Showing all 3 resultsSorted by latest
Graphic kit 100% perso – cross
From: €349,00 This product has multiple variants. The options may be chosen on the product page
Graphic kit logo customization
€60,00
Graphic kit installation
From: €249,00 This product has multiple variants. The options may be chosen on the product pageGraphic kits for the Yamaha Tenere 700 2025 are precision-cut for the restyled T7 – a distinct generation from the 2018-2024 run, with a revised front fairing, new TFT display and updated suspension. Every kit is produced to order in France in premium vinyl (200 to 300 microns), fully customisable in colours, finishes and personal graphics, with a design proof sent for approval before production begins.
Browse the available kits below and select the configuration that fits your 2025 T7.
The Yamaha Tenere 700 2025 is a trail/adventure parallel twin (CP2 engine, 689 cc) producing approximately 73 hp (54 kW). The 2025 restyling introduced a colour TFT instrument panel, switchable ABS and a revised front fairing and suspension setup compared to earlier model years. These bodywork changes make the 2025 a distinct template generation – a kit built for a 2025 T7 is cut to the updated fairing geometry.
This category contains graphic kits designed specifically for the 2025 model year. Three kits are available, each covering the primary fairing components: radiator scoops, front and rear mudguards, side panels, airbox cover, swingarm and fork protectors. Production starts only after your design proof has been approved, so the finished kit matches exactly what you signed off.
Browse the complete Yamaha trail range at Yamaha dirt bike graphics or explore the full dirt bike and trail graphics catalogue across all brands.
The 2025 Yamaha Tenere 700 is not a facelift of the 2018-2024 generation in the cosmetic sense only – the front fairing geometry, instrument cluster housing and suspension components were revised. These changes affect the template geometry used to cut a graphics kit. A kit designed for the 2018-2024 generation may not align correctly on the 2025 bodywork, particularly at the front.
If your bike is a Tenere 700 from any year between 2018 and 2024, use the dedicated Tenere 700 2018-2024 graphic kit category instead. Ordering the kit matched to your exact model year ensures a clean fit on every panel. For the World Raid variant, see the Tenere 700 World Raid 2022 graphic kit page.
Kits in this category are built for the 2025 model year. If you are unsure whether your bike’s fairing matches the 2025 specification – for example if you have a late 2024 or a pre-production variant – contact us before ordering. We verify compatibility against your exact model year at no charge and will direct you to the correct template if needed.
Every Tenere 700 2025 graphic kit starts with a digital design proof sent to you for sign-off before production begins. No two kits leave the workshop identical unless ordered that way. Colours, finishes and graphics are defined before a single piece of vinyl is cut.
A complete Tenere 700 2025 kit covers the following components: radiator scoops, front and rear mudguards, side panels, airbox cover, swingarm and fork protectors. The exact elements included depend on the kit configuration selected – full details are on each product page.
Customisation options include: freely chosen colours, race number integration, personal or sponsor logos, and special finishes such as matt, satin, holographic or chrome. Design styles inspired by rally, adventure touring or enduro racing are all achievable from your brief. A professional fitting service is available if you prefer not to apply the kit yourself. Details are on the graphic kit application service page. To define your exact colour palette, use the personal colour service.
Tenere 700 2025 graphic kits are produced in automotive-grade premium vinyl (3M, Hexis, Oracal, Avery Dennison), 200 to 300 microns thick, with UV-resistant lamination. This specification is the same used across professional motorsport and automotive wrapping – not standard printed film. The material resists trail riding conditions: road debris, pressure washing and sustained outdoor exposure.
The UV laminate layer is the primary protection against colour fade. Colours stay consistent over several seasons of road and trail use without cracking or lifting. Kits are removable without residue on clean, undamaged bodywork, making them a fully reversible modification.
Application is done at room temperature using a squeegee. This method allows repositioning before final adhesion and eliminates bubbles on curved surfaces – the technique works well on the Tenere 700’s compound fairing curves. The process is accessible to any careful rider or can be delegated to a professional fitter.
For a coordinated look across your setup, the motorcycle helmet graphics range uses the same colour palettes. Riders exploring other trail models can browse the BMW F900 GS 2024 graphic kit and the YZF 450 graphic kit for reference.
Not directly. The 2025 restyling revised the front fairing geometry, which may not match the 2018-2024 template. If you have a Tenere 700 from any year between 2018 and 2024, use the Tenere 700 2018-2024 graphic kit category, or contact us with your exact model year for confirmation before ordering.
Yes. All kits are fully customisable – any colour combination, race number integration, personal logos and special finishes (matt, satin, holographic, chrome) are available. Rally, adventure and enduro-inspired styles can be built from your brief. A design proof is prepared and sent for sign-off before any production begins.
A full kit covers: radiator scoops, front and rear mudguards, side panels, airbox cover, swingarm and fork protectors. The exact components vary by kit configuration – each product page lists what is included.
Premium vinyl from 3M, Hexis, Oracal or Avery Dennison, 200 to 300 microns thick, with UV-resistant lamination. The laminate layer prevents colour fade from sun exposure, the primary cause of degradation on outdoor graphics. With regular washing and standard maintenance, the kit performs across multiple riding seasons.
Yes. The kit is pre-cut and designed for bubble-free application at room temperature using a squeegee. The vinyl is repositionable during fitting, which limits errors on the Tenere 700’s curved panels. A professional fitting service is also available if preferred.
A digital design proof is produced within a few working days of your order and personalisation instructions. Production begins after your approval of the proof. Current lead times depend on the level of customisation and are shown on the product page at time of order.
